Education, Science, Technology, Innovation and Life
Open Access
Sign In

Integration of Scientific Research and Teaching in Course of Fundamentals of Mechanical Measurement Technology

Download as PDF

DOI: 10.23977/aetp.2023.070314 | Downloads: 13 | Views: 439


Chunhua Feng 1, Enguang Qin 1, Meng Li 1


1 School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai, 200093, China

Corresponding Author

Chunhua Feng


Fundamentals of Mechanical Engineering Testing Technology is a basic theoretical course for mechanical majors, mainly designing the basic theories and methods of mechanical engineering testing technology. In the field of engineering technology, product development, manufacturing, quality control and performance experiments are inseparable from testing technology. In order to deepen the students' understanding of the theoretical knowledge of testing technology, this paper puts forward the application of the basic theory of testing based on the cutting force sensor. The content includes the working principle of cutting force sensor, signal processing and installation.


Integrated of Research and Teaching, Mechanical Measurement, Cutting Force Sensor


Chunhua Feng, Enguang Qin, Meng Li, Integration of Scientific Research and Teaching in  Course of Fundamentals of Mechanical Measurement Technology. Advances in Educational Technology and Psychology (2023) Vol. 7: 85-89. DOI:


[1] Wen B., Shimizu Y., Matsukuma H., Tohyama K., Gao W. (2020). A differential strategy for measurement of a static force in a single point diamond cutting by a force-controlled fast tool servo. Measurement Science and Technology, 31(7).
[2] Marziani C. D., Urena J., Hernandez Garcia J. J., Alvarez F. J., Jimenez A., et al. (2012). Simultaneous round-trip time-of-flight measurements with encoded acoustic signals. IEEE Sensors Journal, 12(10), 2931-2940.
[3] Niessner S., Liewald M. (2020). Identification of methods for the in-situ measurement of cutting forces in a tool-bound punching machine. IOP Conference Series Materials Science and Engineering, 967, 012025.
[4] Patil R. A., Gombi S. L. (2020). Operational cutting force identification in end milling using inverse technique to predict the fatigue tool life. Iranian Journal of Science and Technology: Transactions of Mechanical Engineering, 46: 31–41.

All published work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright © 2016 - 2031 Clausius Scientific Press Inc. All Rights Reserved.