Preparation and Performance of Red Fluorescent Dye Printed Fabrics
DOI: 10.23977/jmpd.2023.070104 | Downloads: 12 | Views: 454
Author(s)
Hao Shijie 1, Liu Xueying 1, Liu Xinyu 1, Zhang Chunyan 1, Jiang Yuele 1, Diao Wenlian 1
Affiliation(s)
1 Beihai University of Art and Design, Beihai, Guangxi, 536000, China
Corresponding Author
Hao ShijieABSTRACT
The red fluorescent material was used to print the cotton fabric. Printing fabrics with high red fluorescence and UV absorbability were prepared. The effects of the amount of bonding agent, curing temperature and curing time on the friction resistance, soaping, scrubbing color fastness and UV transmittance, fluorescence spectrum and fluorescence quantum yield of printed fabric were studied by orthogonal method. The optimization process is the amount of 30% binder, the curing temperature at 130℃ and the baking time of 4min.
KEYWORDS
Printing; Fluorescence quantum yield; Photoluminescence; Luminescent textileCITE THIS PAPER
Hao Shijie, Liu Xueying, Liu Xinyu, Zhang Chunyan, Jiang Yuele, Diao Wenlian, Preparation and Performance of Red Fluorescent Dye Printed Fabrics. Journal of Materials, Processing and Design (2023) Vol. 7: 19-25. DOI: http://dx.doi.org/10.23977/jmpd.2023.070104.
REFERENCES
[1] Jishu Zhang, Mingqiao Ge. A study of an anti-counterfeiting fiber with spectral fingerprint characteristics [J].The Journal of the Textile Institute, Part 3. Technologies for a New Century, 2011, (9):767-773.
[2] Piotr Kulpinski, Marek Namyslak, Tomasz Grzyb et al. Luminescent cellulose fibers activated by Eu~(3+)-doped nanoparticles[J].Cellulose, 2012, 19(4): 1271-1278.
[3] Yawen Liu, Qianli Ma, Ming Yang, Xiangting Dong, Ying Yang, Jinxian Wang, Wensheng Yu, Guixia Liu. Chemical Engineering Journal. [J]. 2016.
[4] Xu W., Bai X., Zhu Y., et al. Communication: Excitation band modulation with high-order photonic band gap in PMMA: Eu (TTA)_3(TPPO)_2 opals[J]. The Journal of Chemical Physics, 2013, (18):181103-1-181103-4.
[5] Keiji Komatsu, Takaaki Tsuchiya, Yasuhiro Hasebe, Tetsuo Sekiya, Ayumu Toyama, Atsushi Nakamura, Hiroki Akasaka, Hidetoshi Saitoh. Synthesis of Metal Oxide Particles Using Reaction Route from Rare-Earth Metal-EDTA Complexes [J]. Journal of Thermal Spray Technology. 2014 (5).
[6] Abdul Moheman, Mohammad Sarwar Alam, Ali Mohammad. Recent trends in electrospinning of polymer nanofibers and their applications in ultra thin layer chromatography [J]. Advances in Colloid and Interface Science. 2016.
[7] R Naveen, M Kumar. Enhancing UV resistance of TiO; 2; reinforced Kevlar 29 fiber using Sol-Gel & Low- temperature Hydrothermal Processes [J]. Polymer-Plastics Technology and Materials, 2023, 62(1).
Downloads: | 1839 |
---|---|
Visits: | 103906 |
Sponsors, Associates, and Links
-
Forging and Forming
-
Composites and Nano Engineering
-
Metallic foams
-
Smart Structures, Materials and Systems
-
Chemistry and Physics of Polymers
-
Analytical Chemistry: A Journal
-
Modern Physical Chemistry Research
-
Inorganic Chemistry: A Journal
-
Organic Chemistry: A Journal
-
Progress in Materials Chemistry and Physics
-
Transactions on Industrial Catalysis
-
Fuels and Combustion
-
Casting, Welding and Solidification
-
Journal of Membrane Technology
-
Journal of Heat Treatment and Surface Engineering
-
Trends in Biochemical Engineering
-
Ceramic and Glass Technology
-
Transactions on Metals and Alloys
-
High Performance Structures and Materials
-
Rheology Letters
-
Plasticity Frontiers
-
Corrosion and Wear of Materials
-
Fluids, Heat and Mass Transfer
-
International Journal of Geochemistry
-
Diamond and Carbon Materials
-
Advances in Magnetism and Magnetic Materials
-
Advances in Fuel Cell
-
Journal of Biomaterials and Biomechanics