Author(s)

Li Guoping ¹, Zhong Wenzhen ¹, Huang Zhenyong ¹

Affiliation(s)

¹ School of Mechanical Engineering, University of Jinan, Shandong Jinan 250022

Corresponding Author

Li Guoping

ABSTRACT

In the plastic profiles corner cleaning process, the axial vibration of the end mill caused the corner cleaning quality is poor. So, it used the SolidWorks to establish the three-dimensional entity model of the circular saw blades in this article, and then the natural frequencies and the corresponding vibration types of the circular saw blades have been obtained from model analysis of the circular saw blade of the plastic doors and windows corner cleaning machines by using ANSYS, and the analysis of transverse vibration stability of the low frequency range. It was concluded that the allowable speed range of the circular saw blade was 1000rpm-6459rpm and a larger diameter chuck was utilized to enhance the vibration stability of the circular saw blade. The research aims to provide reference data for rationalization of the circular saw blade parameters selection and enterprise actual plastic doors and windows corner cleaning. It has an important theoretical value to improve the quality of the plastic doors and windows corner cleaning.

KEYWORDS

Profiles; Finite Element Analysis; Circular Saw Blades; Modal Analysis; Corner Cleaning

CITE THIS PAPER

Guoping, L. , Zhenyong, H. and Wenzhen, Z. (2016) Research on Dynamic Characteristic on the Circular Saw Blade of the Plastic Doors and Windows Corner Cleaning Based on ANSYS. Journal of Engineering Mechanics and Machinery (2016) 1: 12-18.

REFERENCES

[1] Zhang Shaoqun, Jiao Guangze. Modal Analysis and Vibration Analysis of Circular Saw Blades Based on ANSYS. Forest Engineering, 2014, 30 (2):79-83.
[2] Zou Lu. Study on the Control of Transverse Vibration of Circular Saw Blade. Taiyuan: Taiyuan University of Technology, 2016. 
[3] Wang Yazhou. Analysis and Research on the Vibration of the Saw Blade Cutter. Guangxi: Guangxi University of Science and Technology, 2015.
[4] Xu Dongzhen. The Study of Lateral Vibration of the Lamped Circular Saw in Cutting. Nanjing: Nanjing Forestry University, 2006.
[5] Wu Jiabin. Research on the Circular Saw’s Dynamic Characteristic Basing the FEM. Tianjin: Hebei University of Technology, 2005.
[6] Li Xia. The Accuracy Analysis of Modal Synthesis Method. Xi'an: Xi'an Technological University, 2015.
[7] Jiang Lianqiong. Simulation Study of Circular Saw Cutting Process Based on ANSYS/LS-DYNA. Xi'an: Xi'an Technological University, 2015. 
[8] Zang Yong, Li Tongjin, Tao Dengkui, etc. The Modal Analysis of Circular Saw Blade with FEM. Heavy Machinery, 2002 (1):49-52.
[9] Yuan Ze, Cao Ruiyuan, Zhao Min. Modal Analysis of Diamond Circular Saw Blade. Manufacturing Automation,2013 (9):147-149.

Sponsors, Associates, and Links

---

• Cybernetics and Mechatronics
  
  
• Digital Manufacturing and Process Management
  
  
• Ultra-Precision Machining Process
  
  
• Journal of Robotics and Biomimetics
  
  
• Prognostics, Diagnostics and Health Management
  
  
• Micro-Electro-Mechanical Systems
  
  
• Journal of Precision Instrument and Machinery
  
  
• Engineering and Solid Mechanics
  
  
• Fracture and Damage Mechanics
  
  
• Frontiers in Tribology
  
  
• Fluid and Power Machinery
  
  
• Chemical Process Equipment
  
  
• Journal of Assembly and Manufacturing
  
  
• Mechanical Vibration and Noise