Author(s)

Yulin Lai ¹

Affiliation(s)

¹ State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, 61000, Sichuan, China

Corresponding Author

Yulin Lai

ABSTRACT

The unique stability of cycloidal pin gear reducer can replace many impact transmission mechanisms to play a stable transmission role. Its characteristics are as follows: small quality, long life and easy maintenance. The cycloid reducer is a new type of deceleration equipment, which uses the basic principle of small tooth difference and large planetary transmission system. It can be widely used in manufacturing as a drive or deceleration device. The cycloidal pin gear reducer of the design scheme considers the dynamic model and design criteria, such as stable operation, load sharing of multi-tooth gear transmission and gearbox gear, to maintain high transmission efficiency and high load-bearing capacity. And it is very easy to manufacture. The cycloidal pin gear reducer used in this design has the advantage of simple design method. We can see from the analysis results that the performance index of the bearing is also fully in accordance with the use regulations. In this paper, the research paper discusses the following aspects of the pin wheel output pin-oscillating planetary transmission: First, the traditional method of designing the basic parameters of the pin wheel output pin-oscillating planetary transmission key components is referred to Design and calculation of basic parameters of planetary transmission. Second, the force calculation and analysis of the transmission system including the load of the support bearing and the arm bearing. Third, the final assembly drawings and key parts drawings are drawn using drawing software. Fourth, improve the life calculation and strength check of key parts and bearings such as studs and cycloid wheels.

KEYWORDS

Transmission, Planet—Cycloid Reducer, Cycloid, Reduc

CITE THIS PAPER

Yulin Lai, The Working Principle and Parameter Design Method of Cycloidal Pinwheel Reducer. Journal of Engineering Mechanics and Machinery (2022) Vol. 7: 27-34. DOI: http://dx.doi.org/10.23977/jemm.2022.070305.

REFERENCES

[1] Edited by Qin Datong and Xie Liyang. Handbook of Modern Mechanical Design (3)[M]. Beijing Chemical Industry Press, 2002.
[2] Hua Zhongping, Zhang Li. Research on Algorithm of Optimal Cutting Stock of Angle Steel Based on Linear Programming [C]. Annual Meeting of Mechanical Engineering Societies of Thirteen Provinces, Regions and Municipalities . 2005.
[3] Yoon Do-jun. Research on Wheel Reducer of Heavy Truck [D]. Hefei University of Technology, 2010.
[4] Ran Hengkui. Design and Research of Wheel Reducer for Micro Electric Vehicle [D]. 2008.
[5] Du Xiuju, Qu Jifang, An Zijun. Type Transformation of Pin-Ring Planetary Reducer [J]. Mechanics , 2002, 029(001):58-59,62.
[6] Xia Zhengquan, New Cycloidal Pinwheel Reducer [J]. Practical machinery ,10(2004) .
[7] Zhang Zhan Current situation and development trend of gear reducer [J] Huadian Technology, 2001, 23 (001): 58-59
[8] Sun Heng, Chen Zuomo, chief editor. Mechanical principle [M]. Beijing Higher Education Press, 2001.
[9] L.Pust. Weak and strong nonlinearities in magnetic bearings [J]. Mechanism and Machine Theory, 39 (2004) 779-795.
[10] Kuehnlw MR, Peeken H, Troeder C et al. The Toroidal Drive. Mechanical Engineering, 1981, 103 (2):32-39.
[11] Chief Editor Zou Huijun. Course Design Manual of Mechanical Principles [M]. Beijing Higher Education Press, 1998.
[12] Zhang Qian, Analysis of Load Capacity of Lifting Cycloidal Pinwheel Reducer. Mechanical Design No 27, No.2, February 2010.
[13] Yu Ming, Seo Seung-yeon. Based on Optimal Design of Cycloidal Pinwheel Drive Based on MATLAB. Modern Manufacturing Engineering Issue 8, 2010.
[14] Compilation group of Baosteel Reducer Atlas. Baosteel reducer atlas [M]. Beijing China Machine Press, 1995.
[15] Rao Zhengang, Design of Planetary Transmission Mechanism [M] Version 2. Beijing National Defense Industry Press. 1994.
[16] Lee Young-min. Talk about the principle of cycloidal pinwheel reducer Use and maintenance [J]. Yunnan building materials , 1992(2):36-39.
[17] Liu Huiying, Yang Zhiqiang. Comprehensive Course Design of Mechanical Foundation [M]. Beijing China Machine Press, 2002.
[18] Pu Lianggui, Ji Minggang. Mechanical design [M]. Beijing Higher Education Press, 1996.
[19] Liu Hongwen, chief editor. Mechanics of materials [M]. Beijing Higher Education Press, 1992.9
[20] Duan Hongjie, Tao Hao, Numerical Design of Cycloidal Gear of Cycloidal Pinwheel Planetary Reducer, Coal Mining Machinery, December 2009.
[21] Guan Tianmin, Zhang Dongsheng. Research and Optimization Design of the Converse Bow Tooth Profile in Cycloid Gear Planetary Transmission [J]. Journal of Mechanical Engineering , 2005, 041(001):151-156.
[22] Cheng Daxian. Handbook of Mechanical Design [K]. Beijing Chemical Industry Press. 1993.
[23] Jiang Genghua et al. Mechanical Transmission Design Manual [K]. Beijing Coal Industry Press, 1982.
[24] Luo Wen, Xiang Zhanqin. Based on Finite element analysis of cycloidal pinwheel reducer based on COSMOS works. Mechanical and electrical engineering , May 2010.
[25] Hou Yi, Song Dynasty Province. Visual Design of Cycloid Pin Gear Planetary Reducer [J]. CAD/CAM and Manufacturing Informatization, 2006 (6): 52-53.

Sponsors, Associates, and Links

---

• Cybernetics and Mechatronics
  
  
• Digital Manufacturing and Process Management
  
  
• Ultra-Precision Machining Process
  
  
• Journal of Robotics and Biomimetics
  
  
• Prognostics, Diagnostics and Health Management
  
  
• Micro-Electro-Mechanical Systems
  
  
• Journal of Precision Instrument and Machinery
  
  
• Engineering and Solid Mechanics
  
  
• Fracture and Damage Mechanics
  
  
• Frontiers in Tribology
  
  
• Fluid and Power Machinery
  
  
• Chemical Process Equipment
  
  
• Journal of Assembly and Manufacturing
  
  
• Mechanical Vibration and Noise