Author(s)

Liliang Zhu ¹, Rui Min ¹, Feng Ni ², Linbo Yang ³, Chenpeng Pang ¹

Affiliation(s)

¹ SAIC Volkswagen Co., Ltd., Shanghai, China
² Nanjing Branch SAIC Volkswagen Co., Ltd., Nanjing, Jiangsu, China
³ Changsha Branch, SAIC Volkswagen Co., Ltd., Changsha, Hunan, China

Corresponding Author

Liliang Zhu

ABSTRACT

The coating production line measurement and control system is a system that uses industrial control technology to manage and control the electrical equipment of the coating workshop to realize the entire coating manufacturing process. VOC emissions from automotive paint shops are accompanied by a large amount of heat and a wide variety of VOC components. If not handled properly, it will cause serious pollution to the atmosphere. At the same time, some component gases pose a serious threat to the health of production personnel. The main purpose of this paper is to analyze and study the application of zeolite runner waste gas treatment technology in an automobile paint shops. This paper analyzes the research status of coating production lines at home and abroad and the current status of electronic coating exhaust gas treatment, and focuses on the application of zeolite runners in painting workshops. The largest factor is paint, accounting for 50.15%, followed by cleaning solvent, clear coat, and the smallest is sealant, accounting for only 0.58%.

KEYWORDS

Zeolite Runners, Exhaust Gas Treatment, Automotive Paint Shops, Reaction Kinetics

CITE THIS PAPER

Liliang Zhu, Rui Min, Feng Ni, Linbo Yang, Chenpeng Pang, Application of Zeolite Runner Exhaust Gas Treatment Technology (ADR) in Automobile Paint Shop. Analytical Chemistry: A Journal (2022) Vol. 1: 28-37. DOI: http://dx.doi.org/10.23977/analc.2022.010105.

REFERENCES

[1] Shino Da T A. Commentaries upon Exhaust Gas Treatment Technology on Waste Combustion System[J]. JAPANESE JOURNAL OF MULTIPHASE FLOW, 2017, 31(2):125-129.
[2] Winter F, Musliu N. Constraint-based Scheduling for Paint Shops in the Automotive Supply Industry[J]. ACM Transactions on Intelligent Systems and Technology, 2021, 12(2):1-25.
[3] Aksoy O, Akbulut A. Bir Otomotiv Tesisinde Boya Kabininin Otomasyonu ve Boya Prosesinin Robot Kullanlarak yiletirilmesi[J]. Gazi Üniversitesi Fen Bilimleri Dergisi Part C Tasarım ve Teknoloji, 2020, 8(2):245-261.
[4] Yosri M H , Muhamad P , Yatim N. Evaluation of air flow pattern for conceptual design of automotive painting line using computational fluid dynamic (Cfd) for better dust particle reduction[J]. CFD Letters, 2019, 11(2):42-49.
[5] Graetzl T, Dijk Y V, N Schramm, et al. Influence of the automotive paint shop on mechanical properties of continuous fibre-reinforced thermoplastics[J]. Composite Structures, 2019, 208(JAN.):557-565.
[6] Duarte J M , Gabrielle N , Sales S , et al. Automotive paint analysis: How far has science advanced in the last ten years?[J]. TrAC Trends in Analytical Chemistry, 2020, 132(116061):1-12.
[7] Kurtul S, M Türk. Aplastic Anemia in an Automotive Paint Shop Worker[J]. The Anatolian Journal of Family Medicine, 2020, 3(1):81-84.
[8] Shoemaker J. Using Less Is not Always Best[J]. Auto Body Repair Network, 2019, 58(5):12-15.
[9] Paduloh P, Purba H H. Analysis Of Productivity Based On Kpi Case Study Automotive Paint Industry[J]. Journal of Engineering and Management in Industrial System, 2020, 8(1):1-12.
[10] Modinova L I. On the Issue of Automotive Paint Technology and Composition of Paints and Varnishes Used[J]. Theory and Practice of Forensic Science, 2019, 14(1):80-86.
[11] Memon I A, Ali A, Memon M A, et al. Controlling the Defects of Paint Shop using Seven Quality Control Tools in an Automotive Factory[J]. Engineering, Technology and Applied Science Research, 2019, 9(6):5062-5065.
[12] Lee Y H, Yang W S, Moon D H. Buffer Allocation Problem Using Meta-Model in an Automotive Body Shops with Mixed-model Production[J]. Journal of Korean Institute of Industrial Engineers, 2020, 46(3):296-308.

Sponsors, Associates, and Links

---

• Forging and Forming
  
  
• Composites and Nano Engineering
  
  
• Journal of Materials, Processing and Design
  
  
• Metallic foams
  
  
• Smart Structures, Materials and Systems
  
  
• Chemistry and Physics of Polymers
  
  
• Modern Physical Chemistry Research
  
  
• Inorganic Chemistry: A Journal
  
  
• Organic Chemistry: A Journal
  
  
• Progress in Materials Chemistry and Physics
  
  
• Transactions on Industrial Catalysis
  
  
• Fuels and Combustion
  
  
• Casting, Welding and Solidification
  
  
• Journal of Membrane Technology
  
  
• Journal of Heat Treatment and Surface Engineering
  
  
• Trends in Biochemical Engineering
  
  
• Ceramic and Glass Technology
  
  
• Transactions on Metals and Alloys
  
  
• High Performance Structures and Materials
  
  
• Rheology Letters
  
  
• Plasticity Frontiers
  
  
• Corrosion and Wear of Materials
  
  
• Fluids, Heat and Mass Transfer
  
  
• International Journal of Geochemistry
  
  
• Diamond and Carbon Materials
  
  
• Advances in Magnetism and Magnetic Materials
  
  
• Advances in Fuel Cell
  
  
• Journal of Biomaterials and Biomechanics