Education, Science, Technology, Innovation and Life
Open Access
Sign In

Discussion on calculation method of natural frequency of flue design in thermal power plant based on temperature field simulation

Download as PDF

DOI: 10.23977/jemm.2021.060202 | Downloads: 20 | Views: 1199

Author(s)

Lili Liu 1

Affiliation(s)

1 China Energy Longyuan Environmental Protection Co., Ltd

Corresponding Author

Lili Liu

ABSTRACT

The vibration of the boiler tail flue not only leads to tearing and steam leakage at the welding point between the superheater and manhole, but also makes the acoustic soot blower in the tail flue basically unable to be put into operation, which seriously affects the safe operation of the unit. In order to reduce the size of external reinforcing ribs, the minimum number of internal struts should be used in large section flue. By means of temperature field simulation, the author adds a flow guide device at the junction of the down flue and the horizontal flue to forcibly guide the flue gas to the convection heat exchange area. The simulation results show that the vertical velocity field distribution of the horizontal flue tends to be uniform after adding the diversion device. Measures should be taken to prevent the vibration of the inner strut, such as selecting the inner strut with appropriate specifications; Install fins on the inner strut; Change the natural frequency of the inner strut; Select appropriate flue gas flow rate, etc.

KEYWORDS

Temperature field simulation, Flue, Natural vibration frequency

CITE THIS PAPER

Lili Liu. Discussion on calculation method of natural frequency of flue design in thermal power plant based on temperature field simulation. Journal of Engineering Mechanics and Machinery (2021) Vol. 6: 8-13. DOI: http://dx.doi.org/10.23977/jemm.2021.060202

REFERENCES

[1] Jason, Chen Lizhu, Wang Weidong. Optimal design of flue structure based on temperature field simulation [J]. Journal of Agricultural Engineering, 2019, 35(17): 233-239.
[2] Yang Longjun, Peng Zhen. Numerical Simulation of Flue Gas Flow Field in Evaporation Cooling Flue of 150T Converter (Dry Dust Removal) [J]. 2021(2011-13): 87-88.
[3] Wu Hongju, He Yintao. Heat dissipation design of dry-type transformer based on temperature field simulation analysis [J]. Electromechanical Engineering Technology, 2019, 048(008): 183-185.
[4] Xue Yongming, Chen Fang, Zhang Tuanqing. Discussion on ventilation calculation and air distribution design of main power plant [J]. Energy saving, 2019, 38(02): 32-34.
[5] Zhang Zongyi, Gao Dianrong, Xu Senhao, et al. Numerical simulation analysis and optimization of temperature field of high-speed motor pump [J]. Journal of Chongqing University of Technology: Natural Science, 2020, 34(12): 10.
[6] Jiang Jun, Shi Hongyu, Ren Wei. Research on the forward design of refrigerator mechanical room based on numerical calculation of temperature field [J]. Household Electrical Appliances Technology, 2020(2): 4.
[7] Liu Changfu, Cai Wenhe, Dai Xiao, et al. Research on the design of temperature sleeve length based on temperature field calculation [J]. Instrumentation Technology and Sensor, 2019(7): 91-95.
[8] Li Dan, Zhuang Yingle, Liu Huidong. Experimental study and numerical simulation of thermal conductivity of coal in coal silo of thermal power plant [J]. Energy saving, 2019, 38(3): 4.

All published work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright © 2016 - 2031 Clausius Scientific Press Inc. All Rights Reserved.