Education, Science, Technology, Innovation and Life
Open Access
Sign In

A Utility Model Relates to a Multi-Input Port High-Gain DC-DC Converter for Photovoltaic Power Generation System

Download as PDF

DOI: 10.23977/jeeem.2019.21001 | Downloads: 16 | Views: 3198

Author(s)

Chaolan Zhang 1, Yingqian Yu 1, Ruiming Yu 1, Lepeng Chen 1, Jialan Pan 1, Jingya Zeng 1, Yuhao Deng 1, Chen Zhan 1, Zhiyu Shang 1

Affiliation(s)

1 College of Electrical Engineering & New Energy, China Three Gorges University, Yichang, 443002, China

Corresponding Author

Chaolan Zhang

ABSTRACT

Aiming at the problem of large number of photovoltaic modules and low output voltage in photovoltaic power generation system, a multi-input high-gain DC-DC converter is proposed. The converter has multiple input-single outputs, and has the advantages of low stress of the switching device, simple control, high output voltage gain, and the number of input ports are not limited by the switching tube duty ratio. Finally, an experimental prototype with a rated power of 100W was built to verify the feasibility of the theory.

KEYWORDS

Photovoltaic modules, voltage, theory experiment

CITE THIS PAPER

Chaolan Zhang, Yingqian Yu, Ruiming Yu, Lepeng Chen, Jialan Pan, Jingya Zeng, Yuhao Deng, Chen Zhan and Zhiyu Shang, A Utility Model Relates to a Multi-Input Port High-Gain DC-DC Converter for Photovoltaic Power Generation System, Journal of Electrotechnology, Electrical Engineering and Management (2019) Vol. 2: 1-8. DOI: http://dx.doi.org/10.23977/jeeem.2019.21001.

REFERENCES

[1] Xiao H.F. (2010) Research on key technologies for efficient utilization of photovoltaic power generation. Nanjing University of Aeronautics and Astronautics.
[2] Liu B.Y., Duan S.X. and Kang Y. (2008) Performance Evaluation of High Energy Efficiency DC Modular Photovoltaic Power Generation System. Journal of Solar Energy, (09): 1107-1111.
[3] Hwu, K.I. and Y.T. Yau, (2014) High Step-Up Converter Based on Coupling Inductor and Bootstrap Capacitors with Active Clamping. IEEE Transactions on Power Electronics, 29(6): p. 2655-2660.
[4] Hu X.F. (2014) Research on high gain non-isolated Boost converter topology and its derivative methods. Nanjing University of Aeronautics and Astronautics, 2014.
[5] Wu T.F. and Yu T.H. (1998) Unified approach to developing single-stage power converters, in IEEE Transactions on Aerospace and Electronic Systems, 34(1): 211-223.
[6] Xu Z.W. (2010) Research on full-bridge Boost multi-input DC converter. Fuzhou University.
[7] Luo Q.M., Yan X., Zhou W.W., Wang Y. (2012) A multi-input high-boost Boost converter. Proceedings of the CSEE, 32(03): 9-14+22.
[8] Li Y. (2009) Research on circuit topology and control strategy of multi-input DC converter. Nanjing University of Aeronautics and Astronautics.
[9] Yan X.D. (2017) Research on high gain isolated bidirectional DC-DC converter and its control strategy. Chongqing University.
[10] Wang Y.X. (2017) Development of high-power isolated bidirectional DC/DC converter. North China Electric Power University.
[11] Chen L. (2016) Research on DC-DC converter based on switched capacitor network. Jiangnan University.
[12] Wei Z., Jiang Z.J., Yang X.H. (2018) Cascaded DC Boost Converter Based on DCM. Application of Electronic Technology, 44(11):142-144+149.

Downloads: 2067
Visits: 97255

Sponsors, Associates, and Links


All published work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright © 2016 - 2031 Clausius Scientific Press Inc. All Rights Reserved.